-40%

MEGGER DLRO2 2 A HANDHELD DUCTER LOW RESISTANCE OHMMETER NEW

$ 1475.76

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Restocking Fee: 20%
  • Return shipping will be paid by: Buyer
  • MPN: DLRO2
  • Brand: MEGGER
  • Condition: New
  • All returns accepted: Returns Accepted
  • Ohmmeter Type: Ohmmeter

    Description

    SERIOUS BUYERS ONLY!
    PLEASE READ STORE DETAILS CAREFULLY!
    *** BRAND NEW ***
    MEGGER DLRO2 2 A LOW RESISTANCE OHMMETER
    Item Details:
    The DLRO2 can measure low resistance values across a wide range of applications, from railways and aircraft to industry components. This tough device comes with a brand new ‘difference’ meter that allows repetitive measurements to be easily compared with an initial reference measurement. The difference meter also translates the percentage difference to a needle/pointer movement, making the changes clear to see.
    If your applications require long test leads, then the DLRO2 can provide this without compromising test speed or safety. It has a dedicated long lead test to optimise the output, and this long test lead function is able to provide up to 1 A of test current into 4 ohms resistance. The DLRO2, with its optional cable reel test leads, is therefore ideal for testing wind turbine and avionic lightning protection applications.
    Features
    The DLRO2 is also equipped with a new innovative feature called a "difference" meter. This allows repetitive measurements to be easily compared with an initial reference measurement. The difference meter translates percentage difference to a needle/pointer movement to make it visually easy to see change. New reference measurements can be set at the push of a button.
    The DLRO2 measures low resistance values across a wide range of applications, from railways and aircraft to the resistance of industry components. Applications requiring long test leads are not a problem for the DLRO2 as it has a dedicated long lead test to optimize the output. The long test lead function is able to provide up to 1 A of test current into 4 ohms resistance. This makes the DLRO2, with its optional cable reel test leads, ideal for testing wind turbine and avionic lightning protection applications.
    To allow testing of smaller inductive loads, the DLRO2 can apply 2 A for at least 15 seconds, made possible by the high-capacity built-in rechargeable batteries, together with a separate inductive load function. The batteries can be fully recharged in 2.5 hours, minimizing down time. Note: The DLRO2 is not ATEX/intrinsically safe rated and must not be used in explosive gas environments.
    New Difference Meter for quick data comparisons
    Use long leads at 1 A without compromising test speed
    Safely test the resistance of inductive loads at 1 A
    >600 V active protection against inadvertent live connections without blowing a fuse
    Ideal for outdoor use with protection against dust and moisture to IP54
    Industry standard safety rated at CATIII 600 V/CATIV 300 V
    Manufacturer Specs
    General Specifications
    PHYSICAL Dimensions
    8.98 x 4.1 x 2.95 in. (228 x 105 x 75 mm)
    Display
    Full LCD color screen with user configurable backlight
    Weight
    32 oz (905 grams)
    SAFETY AND ELECTRICAL PROTECTION
    Safety rating
    CATIII 600 V / CATIV 300 V to EN 61010, IEC 61010-031 : 2015, IEC 61010-030
    Safety category rating valid to altitude of 9842 ft (3000 m)
    Live voltage
    Active live voltage protection to 600 V between any test terminals without blowing a fuse. Live voltage warning on display and audible when >5 V is applied between any test terminals. Fuse protected to 1000 V, fuses are not user changeable.
    TEST CURRENT OUTPUT
    Current ranges
    2 A, 1 A, 100 mA, 10 mA and 1 mA
    Maximum compliance output voltage
    3.24 V (1 A mode) 2.2 V (2 A mode)
    Current output accuracy
    Normal and inductive mode: ±10 % Long lead test mode: +10 % -0% at all battery conditions except with low battery indication.
    Thermal EMF/Seebeck effect compensation
    Yes, average of forward and reverse test current measurements
    LOW RESISTANCE MEASUREMENT
    Resistance measurement test modes
    Normal test mode, fast mΩ/long test lead mode and inductive test mode (resistance of inductive loads).
    Overall resistance range
    1 μΩ - 2000 Ω
    Max resistance across C terminals
    2 A with up to 1.1 Ω total resistance and 1 A with up to 3.2 Ω total resistance.
    Basic accuracy
    Bi-directional test current mode: ± 1% ±2 digits. Uni-directional test current mode: ± 1% ± 10 digits. Inductive mode or unidirectional mode will introduce an undefined error if an external EMF is present.
    ENVIRONMENT
    Noise immunity
    Less than 1% ±20 digits additional error with 80 mV peak 50/60 Hz with on screen noise limit indicator.
    Less than 1% ±20 digits additional error with 80 mV peak 400 Hz with on screen noise limit indicator.
    EMC
    IEC61326-1, industrial specification
    IEC61326-2-2
    Dust and moisture ingress
    IP54 to IEC60529 in use
    Altitude
    Operational to 9842 ft (3000 m)
    Temperature
    Operational range 32º F to 122º F (0 ºC to 50 ºC)
    Storage range -4º F to +122º F (-20 ºC to 50 ºC)
    Humidity
    Operational to 95% Storage to 90%
    Power Supply
    Rechargeable 6 x AA NiMH batteries with built-in fast charge (also has the ability to use non-rechargeable alkaline AA batteries (LR6)
    Battery charge time
    < 4 hours
    Battery life
    >1000 bi-directional tests at 2 A auto into a 1 Ω load
    BATTERY CHARGER ADAPTOR
    Line input voltage
    100 to 240 V
    Line input frequency
    50 to 60 Hz
    Output
    12 V DC 1.2 A 14.4 W max
    Type
    Travel adaptor/interchangeable plug adaptor
    Plug types
    Australia, USA, Europe and UK plugs
    CONNECTIONS
    Test terminals
    4 x 4 mm shrouded sockets
    Battery charger
    2.5 mm DC jack connector
    Included Accessories:
    Kelvin clip lead set 2m CAT IV 300 V 10 A
    Kelvin probe lead set 2m CAT IV 300 V 10 A
    100-240 V, 50/60 Hz Charger power supply
    Six Batteries: 1.2 V NiMH AA 2000mAHR
    Hanging hook and strap
    Soft pouch
    USB memory stick (with user guide)
    Condition:
    NEW
    Auction Details:
    Shipping:
    All
    domestic
    packages will be shipped out via Fedex, UPS, or USPS within the lower 48 states
    Shipping to Hawaii, Alaska, Puerto Rico costs extra, message us for shipping quote and those shipments will be shipped out via USPS priority mail, unless otherwise stated in the auction or negotiated in emails.
    Shipping to APO, RR, or PO box will be handled via USPS and would be extra on certain items, please email us prior bidding.
    Goods will be dispatched the latest in
    2
    business days.
    Goods will be shipped out after the holidays and weekends.
    No local pick
    ups accepted at this time, unless otherwise stated in the auction
    Shipping costs are set at that price to cover some of our costs and packaging and handling fees as well as some of the ebay and paypal fees which add to about 13% of the total end price. Please don't email us to negotiate about the shipping costs.  We are extremely busy, so we might not answer your emails.
    Shipping and handling fees are not negotiable, by bidding on this item the buyer agrees to pay for all the shipping costs
    We ship to any destination in the world.
    INTERNATIONAL BUYERS:
    The International shipping rate is flat rate to most destinations in the world, please email us for additional information.
    California buyers are subject to pay 9% tax.
    International  buyers are responsible for all tax and custom duty charges outside the country.
    Payment:
    U.S. Buyers:
    Credit cards through PayPal
    Please note that we can't accept direct credit card payments at this time
    International Buyers:
    PayPal or Wire
    Payment is due within 6 days of auction closing.
    If payment is not received within this time unless otherwise stated or negotiated, item will be relisted on eBay.
    Terms & Conditions:
    After the auction is closed,
    auction winners should contact us regarding any questions or requests.
    After the auction is closed, payment should be received within 6 days.
    Buyer has 30 days to return the product, return product should be brand new with all original accessories, buyer pays shipping costs.
    Shipping and handling charges are not returnable
    Items will be replaced or exchanged in case of DOA
    If the same item or similar item is not in stock in case of DOA, the buyer will receive a refund back
    We combine shipping to save customers money, however, there will be an additional charge per item, please read the description for each item to find out about the specific fees.
    All buyers are subject to pay all taxes and duty fees inside and outside of the United States,
    Our facilities are closed during the weekends and other holidays and there will be no shipments during these time periods. All packages will go out after the weekend or after the holidays.
    Contact Information:
    Please use ebay message