-40%
Eminence GA-SC64 12" Guitar Speaker by George Alessandro 8 ohm FREE SHIPPING!
$ 73.91
- Description
- Size Guide
Description
Eminence GA-SC64 12" Guitar Speaker by George AlessandroMidwest Speaker is an authorized Eminence distributor and we stock the majority of the Eminence product line. Please contact us if you need a different model.
New in Box. Price is for (1) one speaker. Just change the quantity to order more.
*Vintage American ceramic magnet tone approved by legendary amp builder, George Alessandro. Well-balanced from top to bottom with tight, full lows, warm mids, and warm, but open highs.
Eminence and George Alessandro have teamed up once again to develop a 12” guitar speaker with vintage sounds circa 1964, the GA-SC64.Well-balanced from top to bottom, the GA-SC64’s warm, dynamic character lends itself to vintage amps as well as modern gain and distortion. The traditional build materials offer warmth, dynamics, low note articulation and proper distorted harmonic content layering.
“The early 1960’s was a time when things were simpler. Studios were recording with one or two analog tape tracks. Stereo records were high tech, and hum canceling pickups were still awaiting a patent.” said George Alessandro, President, Alessandro High-End Products. “The warm, full character of the GA-SC64 brings you back to those days when used in vintage amps. While many things have advanced in 50 years, the tone of 1964 still rings true with this unique guitar speaker.”
Specification
Nominal Basket Diameter
12", 305 mm
Nominal Impedance*
8 Ω
Power Rating**
Watts
40 W
Music Program
N/A
Resonance
88 Hz
Usable Frequency Range
80 Hz - 5.3 kHz
Sensitivity***
100.5 dB
Magnet Weight
38 oz.
Gap Height
0.313", 8 mm
Voice Coil Diameter
1.75", 44 mm
Thiele & Small Parameters
Resonant Frequency (fs)
88 Hz
DC Resistance (Re)
7.63 Ω
Coil Inductance (Le)
0.67m H
Mechanical Q (Qms)
16.82
Electromagnetic Q (Qes)
0.6
Total Q (Qts)
0.58
Compliance Equivalent Volume (Vas)
44.96 liters / 1.59 cu.ft.
Peak Diaphragm Displacement Volume (Vd)
83.8 cc
Mechanical Compliance of Suspension (Cms)
0.12 mm/N
BL Product (BL)
13.8 T-M
Diaphragm Mass Inc. Airload (MMs)
27 grams
Efficiency Bandwidth Product (EBP)
146
Maximum Linear Excursion (Xmax)
1.23 mm
Surface Area of Cone (Sd)
519.5 cm2
Maximum Mechanical Limit (Xlim)
N/A
Mounting Information
Recommended Enclosure Volume
Sealed
Acceptable
Vented
Acceptable
Driver Volume Displaced
0.071 cu.ft. / 2 liters
Overall Diameter
12.17", 309.1 mm
Baffle Hole Diameter
11.13", 282.7 mm
Front Sealing Gasket
Yes
Rear Sealing Gasket
N/A
Mounting Holes Diameter
0.24", 6.1mm
Mounting Holes B.C.D.
11.75", 298.5mm
Depth
5.13", 130.2 mm
Net Weight
7.5 lbs, 3.4 kg
Shipping Weight
8.4 lbs, 3.81 kgs
Materials of Construction
Coil Construction
Copper voice coil
Coil Former
Paper former
Magnet Composition
Ferrite magnet
Core Details
Non-vented core
Basket Materials
Pressed steel basket
Cone Composition
Paper cone
Cone Edge Composition
Paper cone edge
Dust Cap Composition
Solid composition felt dust cap
MADE IN THE USA.
FAST FREE UPS GROUND SHIPPING TO THE MAINLAND 48 UNITED STATES ONLY.
Shipping to Alaska, Hawaii and Puerto Rico are extra. Contact us for an estimate.
INTERNATIONAL SHIPPING TO CANADA WELCOME!!!
Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms.
*Returns only accepted if speaker has NOT been mounted or soldered. If you return an unused speaker our shipping costs to you are not refundable and buyer must pay for return shipping.