Electromagnetic Flow Meter 2", Hard Rubber, SS Electrodes, 150# Flange

Description

Electromagnetic Flow Meter 2", Hard Rubber, SS Electrodes, 150# Flange
Tek-Flux 1400A Electromagnetic flow meter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flow meter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids.
Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection
Easy maintenance due to no moving parts
Uninfluenced by temperature, pressure, viscosity, and density
Used for wide application, can measure conductive fluid, without reference to fiber, solid or suspending material contained in liquid
High turndown ratio up to 1:100
It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function
Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit
Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption
Lining and electrode available in various materials which can measure nearly all conductive fluids
4 to 20 mA
The power supply system has good voltage vibration ability
Meters batching and blending totalization
Accuracy
±0.5%
Repeatability
0.15%
Ambient Temperature
Integral Type
14 °F to 122 °F (-10 °C to +50 °C)
Humidity
5% to 95% RH (no frost)
Vibration Frequency
55Hz
Amplitude
0.55mm
Ambient Magnetic Field
≤400A/m
Fluid Temperature
Direct Mount
≤176°F (80°C)
Separate Type
Rubber Lining
≤176°F (80°C)
PTFE Lining
≤248°F (120°C)
Nominal Pressure
Limited to Flange Rating
Power Supply
18 to 36VDC
Enclosure
IP65
Output Signal
Pulse and 4 to 20 mA
Electrode Materia
316SS or Hastelloy C (See Model Listed)
Lining Material
PTFE or Hard Rubber (See Model Listed)
Flange Material
Carbon Steel
Measuring Tube Material
Stainless Steel