Digital Turbine Flowmeter Diesel Kerosene Fuel Flow Meter 15-120L 1" NPT

Description

Digital Turbine Flowmeter Diesel Kerosene Fuel Flow Meter 15-120L 1" NPT
Description:
This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters.
Featu
res:
Modular design makes it suitable for use with output modules, sensors and remote transmitters.
Compact structure, easy to install.
Intuitive clear reading, high reliability, measuring accuracy is ±1%.
High-definition displays show both instantaneous and cumulative flow.
Can be widely used to measure diesel, kerosene, gasoline, etc.
Specificat
ion:
Operating voltage: 2.3-3.3V
Battery type: 2 x AAA LRO3 batteries
Thread size: 1inch
NPT
Repetition: ±0.5%
Measure accuracy: ±1%
Maximum working pressure: 20BAR
Flow range: 15-120L / Min
Single count: 0.00-9999.9
Total cumulative count: 0-99999
Mistakes count: 0.1000-9.9999
Working temperature: -10°C ~ +60°C(14°F~140°F)
Standby time: 1 year
Application: Diesel, kerosene, gasoline
Color: Red, Blue(Optional)
Weight: 371g
Malfunction and solution
:
The flow meter is not accurate.
1. The method of field calibration is not correct.
Calibrate again.
2. The flow rate on the meter is below the lowest.
Increase the flow rate.
3. The flow meter is blocked by the dry liquid.
Take out the impeller and clean it carefully and make sure the impeller turns freely.
4. The impeller is wrapped by the sealing material.
Remove the meter and make sure the impeller turns freely.
5. Too close to the impeller.
Install properly.
6. Too close to the motor or electronic noise environment
Install properly.
The reading numbers faded or blanked out.
1.Battery is exhausted or not connected
Check the batteries or even replace them.
Flow rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts.
1. Field calibration is not correct.
Calibrate again.
2. The impeller is blocked or damaged.
Remove the meter and make sure the impeller turns freely.
3.The impeller is wrapped by the sealing material.
Remove the meter and make sure the impeller turns freely.
Flow rate is low and the meter can not count. Press the button of DISPLAY, the meter starts.
1. The flow meter is blocked by the dry liquid.
Take out the impeller, clean it carefully and make sure the impeller turns freely.
2. The flow rate on the meter is below the lowest.
Increase the flow rate.
The meter can not calibrate.
1. Circuit board is break down.
Replace the circuit board.
2. Button is fail to press.
Replace the circuit board.
Package
List:
1 x Turbine Flow Meter
1 x Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Payment
We accept PayPal .
We ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to eBay for solution.
About us
Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area.
Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
Contact Us
We are happy to answer your questions or resolve any issues you might have with the item you order.
Pls
contact us through messages.
Questions will be answered within 48 hours normally. There is time difference, so please give us a little more time to help you.
If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area.
Please don't leave us any neutral or negative feedback or low DSRs without contacting. Communication, then solution. Happy ebay shopping experience needs your kind cooperation!
Your feedback is to our success!