5V WiFi Relay + ESP8266 ESP-01 Module Smart Home Phone APP Remote Control Switch

Description

Home
Arduino
Module
Sensor
Chips
About Us
5V WiFi Relay + ESP8266 ESP-01
Plus a ESP-01 Module, the intelligent relay module based on ESP-01 WIFI module design, can be used for DIY their own smart switch, you can remotely through the mobile APP control, providing APP and LUA source. Easy to use, easy to use.
Features:
* Module operating voltage: DC 5V
* Relay load capacity: 10A 250VAC 10A 125VAC 10A 30VDC 10A 28VDC
Application:
1. Wiring: Connect the relay terminals to the equipment to be controlled, such as lights and fans. The The The
2. burn program: use the site to provide the downloader, a key to download. Andrews and LUA Source:
https://pan.baidu.com/s/1pLwkH3X
3. mobile phone connected to ESP-01 issued a hot spot, open the phone APP: ESP8266 Controller, set the IP address: the default 192.168.1.1
Password: 12345678
Package Included:
1 x  5V Wifi Relay + ESP8266 ESP-01 Module IOT APP Controled For Smart Home
ESP8266 ESP-01 Module
Features:
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated MAC/baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions:
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications:
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Package Include:
1 x ESP8266 Esp-01 Remote Serial Port WiFi Transceiver Wireless Module AP+STA
5V WiFi Relay Module
Description:
This relay is based on ESP-01S WIFI module.
It is designed for smart home, Internet of thing and other DIY project.
With this smart relay, you will easy to DIY your smart switch to control any device by your phone anywhere.
Product parameters:
Product size: 37x25mm
Operating voltage: DC 5V
Communication: WIFI (ESP8266 module)
Transmission distance: Max.400m (open environment, mobile phone equipped with WIFI module)
Load: 10A/250VAC 10A/30VDC, the relay pull 100,000 times.
Note: the item is not include ESP-01S Wifi Module.
Package include:
1 x 5V WiFi Relay Module
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.